Sliding door fitting guide bar SB 20 E
Sliding door fitting, SB 20 E guide latch
AY-ROLL-SLIDDR/SB20E-TOP-BROWN
Register now and access more than 125,000 products
- Visible for interior doors, cabinet sides and lower base
- Load-bearing capacity: 20 kg
- Runs lightly and quietly
- Bottom guide castor made from nylon. Adjust height to ±3 mm using eccentric fitting and guide cams
- Drill hole diameter for guide elements: 35 mm
- Easy to install with standard tools
Top guide bar made from nylon with spring-loaded pin. Pin overlay of 5 or 8 mm
- Doors are quick to remove/hang
- Tolerance compensation for height adjustment
Doors clip onto the cabinet
- Doors are assembled without tools
- Doors are quick to hang
One rail for top and bottom shelves
- Uniform milling dimension
- Flexible shelf placement
Datasheets(X)
 | |
Material | Plastic |
Colour | Brown |
Suitable for max. door weight | 20 kg |
Suitable for min. door thickness | 16 mm |
Milling cutter diameter | 35 mm |
Required number with 2 elements | 4 PCS |
Required number with 3 elements | 6 PCS |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Setting tool For manual installation
Hand tap, third tap HSS DIN 352
Base height adjuster, type C Press-fit
Turning, ball bearing mounted ring bolt with key
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Flat washer For hexagon head bolts and nuts
Hexagonal bolt with shank
Corvus full-grain leather S3 safety boots