Special system screw For push-in connector
Special screw steel zinc plated yellow cs head TX
SPECSCR-F.WOCON-CS-L-TX30-8X100/80
Register now and access more than 125,000 products
Depending on the connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values.
The specified characteristic load-bearing values are guaranteed by using the appropriate system screws with the respective connector in accordance with ETA-12/0067.
- The special system screws fit perfectly into the screw hole of the respective connector
- Half-tip ensures optimum initial screw bite and reduced risk of splitting through its pre-drilling effect
- Reinforced screw head
Datasheets(X)
To be used for connectors
 | |
Type description | L |
Nominal diameter | 8 mm |
Length | 100 mm |
Head type | Countersunk head |
Head diameter | 13 mm |
Head height | 4 mm |
Internal drive | TX30 |
Thread design | Full thread |
Thread length | 80 mm |
Core diameter | 5.3 mm |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 21.700 g |
Last viewed
Professional cleaning gun
Multiple plug housing for blade connectors 2.8 x 0.5 mm
Multi-Tester Pro II LCD two-pin voltage tester
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
Cable feed device CPS 3
Staples for hand-held stapler and hammer tacker
WÜTOP® 95 roofing underlayment
1/2" socket wrench insert Inch, short
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)