Special system screw For push-in connector
Special screw steel zinc plated yellow cs head TX
SPECSCR-F.WOCON-CS-M-TX25-6,5X65/50
Art.-no. 0681352284
EAN 4053479217185
Register now and access more than 125,000 products
Depending on the connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values.
The specified characteristic load-bearing values are guaranteed by using the appropriate system screws with the respective connector in accordance with ETA-12/0067.
- The special system screws fit perfectly into the screw hole of the respective connector
- Half-tip ensures optimum initial screw bite and reduced risk of splitting through its pre-drilling effect
- Reinforced screw head
Datasheets(X)
To be used for connectors
 | |
Type description | M |
Nominal diameter | 6.5 mm |
Length | 65 mm |
Head type | Countersunk head |
Head diameter | 10 mm |
Head height | 3 mm |
Internal drive | TX25 |
Thread design | Full thread |
Thread length | 50 mm |
Core diameter | 3.25 mm |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 7.715 g |
Last viewed
Aquarius fleece jacket
Special end brush 2 pieces with stabilisation ring
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Hexagon bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Small parts shelf, accessories
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
1-component expanding foam
Hexagon Socket Head Cap Screw with metric fine pitch thread DIN 912, plain 10.9 steel
Sealing plug W.TEC® COVER CAP WP 300 F polyethylene, natural
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated