Special system screw For push-in connector
Special screw steel zinc plated yellow cs head TX
SPECSCR-WOCON-CS-XS/S-TX20-4,5X50/36
Register now and access more than 125,000 products
Depending on the connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values.
The specified characteristic load-bearing values are guaranteed by using the appropriate system screws with the respective connector in accordance with ETA-12/0067.
- The special system screws fit perfectly into the screw hole of the respective connector
- Half-tip ensures optimum initial screw bite and reduced risk of splitting through its pre-drilling effect
- Reinforced screw head
Datasheets(X)
To be used for connectors
 | |
Type description | XS/S |
Nominal diameter | 4.5 mm |
Length | 50 mm |
Head type | Countersunk head |
Head diameter | 7.5 mm |
Head height | 2.8 mm |
Internal drive | TX20 |
Thread design | Partial thread |
Thread length | 36 mm |
Core diameter | 2.6 mm |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 3.065 g |
Last viewed
Hexagon shoulder screw with long threaded pin DIN 609, steel 10.9, plain
Hexagon shoulder screw with long threaded pin DIN 609, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Hexagon nut with trapezoidal thread
Twin rail For redoslide M15-HE, M15-HC
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Pull handle ST/A100
Decorative cap, type A For Nexis or Tiomos glass door hinges