Square wedge-shaped washer DIN 435, zinc-plated steel, for I-section
DIN 435 steel zinc plated for I-carrier
WSH-WDGE-DIN435-(A2K)-11X22X22MM-F.M10
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
Tapered washers for I-sections, for screw connections up to strength class 5.6
 | |
Suitable for screw thread (Ø) | M10 |
Internal diameter (d1) | 11 mm |
Length (l1) | 22 mm |
Width (b1) | 22 mm |
Height (h1) | 4.6 mm |
Standards | DIN 435 |
Material | Steel |
Surface | Zinc plated |
Tilting | 14 % |
Suitable for | I section |
RoHS-compliant | Yes |
Last viewed
Elbow With suction regulation for dry vacuum cleaners
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
1-ear clamp with insert ring
Brush belt, fine
1/2-inch impact socket wrench insert bi-hex, metric, short
WÜPOFAST® A2 PZ Particle board screw
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Aluminium adhesive tape
Sealant Seal Flex
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated