Square wedge-shaped washer DIN 435, zinc-plated steel, for I-section
DIN 435 steel zinc plated for I-carrier
WSH-WDGE-DIN435-(A2K)-13,5X30X26MM-F.M12
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
Tapered washers for I-sections, for screw connections up to strength class 5.6
 | |
Suitable for screw thread (Ø) | M12 |
Internal diameter (d1) | 13.5 mm |
Length (l1) | 26 mm |
Width (b1) | 30 mm |
Height (h1) | 6.2 mm |
Standards | DIN 435 |
Material | Steel |
Surface | Zinc plated |
Tilting | 14 % |
Suitable for | I section |
RoHS-compliant | Yes |
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Wire cup brush Braided steel with M14 connecting thread
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
15-pin connector Standard 24V
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Multi-clips for test leads
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)