AMO-light stand-off installation
SCR-AMOLIGHT-CS-DWL-AW40-(A2K)-10X260
Art.-no. 0912810619
EAN 4050641989062
Register now and access more than 125,000 products
The set consisting of screw and fixing reduces material costs.
The quick embedment process reduces installation time.
Immediate load-bearing capacity - no waiting.
The AMO-light fastening features a plastic fixing made of high-quality polyamide (nylon) integrated in the screw shank.
SHARK UR 10 plastic frame fixing
- Expands in four directions
- Very strong anti-rotation lock
- Made from high-quality polyamide (nylon)
The fixture is attached to the screw shank by screwing a 4 mm chipboard screw (no drill tip, counter thread, ring thread) into the plastic fixing (the plastic fixing is in the screw shank).
Resistant to rotting, weathering and ageing.
Combi set consisting of: AMO®-light screw + SHARK® UR 10 plastic frame fixing.
Surveillance cameras
Drill the hole
Clean the drill hole
Install anchor
Screw in the AMO-light screw
Attach the component by screwing-in a 4 mm particle board screw
Detail A
Datasheets(X)
Fastening of non-safety-relevant components
- Can be used in concrete, solid brick, solid sand-lime block, vertically perforated brick, hollow sand-lime block, autoclaved aerated concrete, hollow lightweight concrete block, solid lightweight concrete block and concrete bricks.
- Stand-off installation for light loads (F ≤ 10 N per screw).
- E.g. lighting, lamps, electrical switches, building signs, information signs, alarm systems, motion detectors etc.
Drill perforated and hollow concrete blocks with a rotary drill (without hammer mechanism). Drill cuttings must be removed from the drill hole.
Nominal drill hole diameter | 10 mm |
Embedding depth | 60 mm |
Drill hole depth | 80 mm |
Length | 260 mm |
Internal drive | AW40 |
Max. attachment height in solid brick | 200 mm |
Max. attachment height in perforated brick | 200 mm |
Required particle-board screw diameter | 4 mm, screw-in depth: 16-26 mm |
Material | Steel |
Thread diameter | 4 mm |
Surface | Zinc plated |
Head type | Countersunk head |
Last viewed
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
Split pin ISO 1234 A4-70 stainless steel, plain
Cordless multi-functional dry vacuum cleaner AMTS 18 L COMPACT M-CUBE
Pan head screw with Z cross recess DIN 7985, A4-70 stainless steel, plain
Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
HSS DIN 338 SMART STEP twist drill bit
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, zinc plated 10.9 steel with thick-layer passivation (VZD)
WÜPLAST® countersunk head screw with hexalobular recess WN 1423, steel 10.9, zinc plated, transparent passivated (A3K)
Slotted cheese head DIN 84, A4 stainless steel, plain