Stand-off installation system AMO®-Therm
Adapt. w. thread. fitt., sst A4, AMO-Therm
ADAPT-AMOTHERM-SET-ANC-A4-80-M12/M16X320
Register now and access more than 125,000 products
Quick and easy installation
Thermal bridge-reduced element for connecting and transferring loads from the attached part to the substrate
The thermal separation adapter in a plastic cone interrupts the thermal bridge and prevents heat loss to the outside.
Secure attachment with approval for high loads in a wide range of building materials
When anchoring in a substrate with the injection mortars WIT-VM 250, WIT-VM 200 and WIT PM 200
Usable lengths from 80 to 300 mm can be covered with an AMO-Therm
Individual and flexible length setting using the adapter with commercially available threaded rods with acceptance test certificate 3.1
Datasheets(X)
CAD data (available after login)
Attachment with low thermal loss to insulated substrates indoors and outdoors, in walls, facing insulation on ceilings, non-bearing façades
e.g. awnings, canopies, post box systems, satellite systems, lighting equipment, light wells, air-conditioning units, brackets, grids, metal structures, balcony railings, balcony privacy screens, etc.
Can be used in different building materials
Solid and hollow sand-lime brick, normal and lightweight concrete, cracked and non-cracked concrete, aerated concrete, solid and vertically perforated brick
Can be used outdoors, in humid areas and close to the sea
External parts made from stainless steel.
Suitable for pre-positioned installation
Connection thread (1) | M12 |
Material of connection thread (2) | Stainless steel A4 |
Diameter threaded rod (3) | M16 |
Material of threaded rod (4) | Stainless steel A4 |
Length (5) | 385 mm |
Last viewed
pias® drilling screw, flat head with AW drive
Plastic hand sanding block
Pipe clamp TIPP® Smartlock 2 GS With exclusive Würth quick-action closure for secure, fast installation
All-rounder injectable mortar WIT-VM 250
Plastic expanding rivet without cap, with multiple slits
Twist drill bit HSS DIN 340 type RN 130°
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Sheet metal shears
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
pias® drilling screw, raised countersunk head with AW drive