Straight connection piece For hard-to-reach lubrication and manifold points
Connection piece straight
FITT-CLS-CONPIECE-M8X1TAP-M8X1-18MM
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For extension if the lubrication or support point is recessed.
 | |
Connection thread (d2) | M8 x 1 |
Outlet thread (d) | M8 x 1 tapered |
Width across flats (SW) | 11 mm |
Length (L) | 18 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
1/4 inch bit holder, magnetic
Spring nut, type 2 Wide open screw-in area
pias® drilling screw, round head with collar and AW drive
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Hexagon nut with left-hand thread DIN 934, steel I8I, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Raised countersunk tapping screw, C shape with H recessed head
Flat connector Junior Power Timer (JPT) 2.8
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV