Super RTV silicone adhesive and sealing compound

Name: Super RTV silicone adhesive and sealing compound
Brand: Würth
SKU: 08933312

Adh./sealing comp Super RTV silicone no haz. subst
SILSEAL-HTEMP-(SUPER-RTV)-RED-200ML

Art.-no. 08933312

EAN 4058794512274

All versions

Similar products

Price for selected packaging unit

Super RTV silicone adhesive and sealing compound

Art.-no. 08933312

Price for selected packaging unit

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

High-quality adhesive and sealing compound for use in industry and the automotive sector.

Excellent resistance to chemicals

Can also be used in critical areas in which the seal comes into contact with various liquids

Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent

Non-acidic hardening system

Non-corrosive, therefore has no negative impact on electronic components and on lambda probes

Sealant in compressed-air can

Easy to dispense without additional aids

The fine beads allow the product to be applied uniformly

Notice

When sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

Optimum adhesion to dry, clean and dust-free surfaces. The old sealant must be removed in full from the surface.

Colour	Red
Contents	200 ml
Chemical basis	Neutral crosslinked silicones, oxime-based
Smell/fragrance	Characteristic
Min./max. temperature resistance	-60 to 315 °C
Max. short-term temperature resistance	370 °C
Range of applications	Oil pumps Front cover Camshaft bearing cover Oil pans Transmission cover Exhaust manifold Exhaust flange Cover and flange on engines Intake area
Density	1.25 g/cm³
Min. skin-formation time	5 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Full curing speed	3 mm/d
Fully hardening/curing conditions	23°C and 50% relative humidity
Shore A hardness	25
Min. tensile strength	2.2 N/mm²
Conditions for tensile strength	in accordance with ASTM D-412
Max. breaking elongation/conditions	500 % / in accordance with DIN 53504
Heat conductance λ	0.2 J/(msK)
Heat conductance λ conditions	in accordance with ASTM D-2214/70
Coefficient of thermal expansion	0.0002 1/K
Coefficient of thermal expansion conditions	in accordance with ASTM EB-31
Dielectric strength	16 kV/mm
Dielectric strength conditions	in accordance with ASTM D-149
Relative permittivity	2.8
Conditions for relative permittivity	1 MHz, ASTM D-150
Loss factor	0.002
Loss factor conditions	1 MHz, ASTM D-150
Specific volume resistivity	1000000000000000 Ohm/cm
Conditions for specific volume resistivity	in accordance with ASTM D-257

Required accessory:

Product

Description

Quantity

Price
/PU

Nozzle attachment Super RTV silicone

NOZATTCH-PAGERIS-(RTV-SILIKON)-L130

Art.-no. 0891321001

x 3 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).