Surface rust remover

Name: Surface rust remover
Brand: Würth
SKU: 0890130

Surface rust remover
RUSTFLMREM-5LTR

Art.-no. 0890130

EAN 4045989987931

All versions

Price for selected packaging unit

Surface rust remover

Art.-no. 0890130

Price for selected packaging unit

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

For easy removal of surface rust on bodywork, sheet metal and steel, iron and cast metal parts.

Contains effective acids, surface-active agents and surfactants

pH value (10%): 1.3

AOX-free

Silicone-free

Transparent

Notice

Recommendation: The treated areas should be protected against further corrosion by applying a primer or corrosion protection spray (art. no. 089315). Check materials such as plastics and rubber for compatibility. Do not use in direct sunlight. Avoid direct heat.

Since the sensitivity of paints increases with the temperature, in the case of professional used car refurbishment or cleaning of commercial vehicles, the body surfaces to be treated must cool down to ambient temperature (< 30°C). Do not use in direct sunlight. The exposure time on painted and uncoated surfaces such as sheet metal, steel, iron or cast iron parts is a maximum of three minutes. Do not allow the product to dry. In order to check the material compatibility of the acidic cleaner on surfaces made of plastic or rubber, we recommend carrying out your own tests beforehand.

The treated surfaces should be protected from further corrosive attack by priming or by using a WÜRTH corrosion protection spray.

The hydrochloric acid cleaner is biodegradable once it has been neutralised with lime milk.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For easy removal of surface rust on bodywork, sheet metal and steel, iron and cast metal parts.

Instructions

Apply to the surface to be cleaned and allow to take effect for max. 3 minutes, then rinse thoroughly with water. Repeat the cleaning process where necessary. The product is biodegradable once it has been neutralised with lime milk.

Contents	5 l
Colour	Transparent
Smell/fragrance	Characteristic
Chemical basis	Water and hydrochloric acid
Shelf life from production	24 Month
Min. application time	2 min
Max. application time	3 min
pH value	1.3
Conditions for pH value	10% solution
Density	1.02 g/cm³
Density conditions	at 20°C
Silicone-free	Yes
AOX-free	Yes

Suitable glove:

Product

Description

Chemical protective glove chloroprene

Description:

Permeation level: 6

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.