TIG welding rod for aluminium welding
TIG welding rod for aluminium welding
WELDROD-TIG-ALMG5-2,4MMX1M
Register now and access more than 125,000 products
- S-AIMg 5, DIN 1732
- Designation in accordance with ASME: ER 5356
- Material number 3.3556
Welding rods are welded with AC.
Datasheets(X)
Suitable for welded joints on the following basic materials:
AIMg2Mn0,8, AIMg2,7Mn, AIMg3, AIMg4.5Mn, AIMg5 (max. +80°C), AIMgMn G-AIMg3, G-AIMg3Si, G-AIMg5, G-AIMg5Si, G-AIMg3 (Cu) — not approved by TÜV
Wire diameter | 2.4 mm |
Length | 1000 mm |
Weight | 5 kg |
Material designation | S-AIMg 5 |
Material | Aluminium base alloy, AIMg5 |
Mn composition of the brazing solder (weight-%) | 0.6 % |
Min. elasticity limit (Rp 0.2 value) | 90 N/mm² |
Mg composition of the brazing solder (weight-%) | 5.5 % |
Ti composition of the brazing solder (weight-%) | 0.2 % |
Shielding gas | Pure argon |
Min./max. tensile strength | 220-260 N/mm² |
Min. breaking elongation | 20 % |
Last viewed
Compartment rail For drawer cabinets made from zinc-plated sheet steel with slots on both sides
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Uni-Top mechanic's glove
Lining tape
Collated nails and gas cartridge NG CS-2/3 HD
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
3-ply toilet paper
C 6.3 TX bit (1/4 inch)