Thin sheet metal screw With hexagon head DBS
Thin sheet metal screw DBS steel zinc plated
SCR-DBS-WS8-(A3K)-4,8X20
Register now and access more than 125,000 products
Advantages of the tip geometry:
- No pre-drilling
- Shingless screws due to material displacement
- Higher extraction values due to the tension of the thread forming
Suitable for component combinations tI / tII according to approval ETA-10/0184
- Steel / Steel - for ∅ 4,8 mm
In dry interior applications
Zinc-plated drilling screws may only be used where dampness is not to be expected. For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | Tip |
Underground | Steel, Aluminum |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 20 mm |
Head diameter (dk) | 10.5 mm |
Head height (k1) | 4.5 mm |
External drive (s1) | WS8 |
Max. material thickness to be drilled through (metal) | 2.5 mm |
For max. substructure thickness | 1.25 mm |
Approval | ETA-10/0184 |
Datasheets(X)
Last viewed
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
Milling jig
Hand tap, second tap HSS DIN 352
Synthetic corundum vulcanised fibre disc
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Pelican snips
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Mask - M016
FLEXEN® rubber foam refrigeration insulation Plus S2, 2 m hose, self-adhesive
Hexagonal bolt with thread up to the head
