Thread-rolling screw
DIN 7500-1 steel zinc plated flat head TX shape PE
SCR-PANHD-DIN7500-PE-TX30-(A2K)-M6X12
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 12 mm |
Head diameter (dk) | 12 mm |
Head height (k1) | 4.6 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | TX30 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Last viewed
Twist drill bit HSS DIN 338 type RN 118°
Linen sanding belt Aluminium oxide
Twist drill bit HSS DIN 1897 type RN
VDE side cutters, DIN ISO 5749 IEC 60900
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Steering wheel Swivelling with brake
Polo shirt Job+
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
Washer/wing repair washer assortment
WÜPOFAST® zinc-plated blue chipboard screw