Union nipple
Socket union brass
SKTUN-BRS-DN12-AG-G1/2IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1/2 inch |
DN nominal width | DN 12 |
Internal diameter | 16.0 mm |
Width across flats (SW) | 24 mm |
Length | 19 mm |
Last viewed
Multi-purpose drill bit MFD-S Plus
Electrode manual welding inverter ESI 200
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Aluminium barrier post with base for barrier chains
Brush belt, stainless steel
Twist drill bit HSCo DIN 338 Red Line 19 pcs Syska
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel