Union nipple
Socket union brass
SKTUN-BRS-DN20-AG-G1IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1 inch |
DN nominal width | DN 20 |
Internal diameter | 25.4 mm |
Width across flats (SW) | 36 mm |
Length | 23 mm |
Last viewed
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Assembly key Die-cast zinc
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Centre bracket East-West AeroMount
1/2 inch socket wrench insert, metric
Hexagonal nut with clamping piece (all-metal) ISO 7042, steel 8, hot-dip galvanised (hdg)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)