VKP^® PLUS sealing tape

Name: VKP ® PLUS sealing tape
Brand: Würth
SKU: 087501103

Sealing tape, VKP PLUS
SEALTPE-(VKP-PLUS)-10/3-BLACK-10M
VKP

Art.-no. 087501103

EAN 4024835893541

All versions

Specification

High-quality, waterproofed, pre-compressed BG1 sealing tape for secure and permanent joint sealing up to over 600 Pa. BG1 and BGR according to DIN 18542:2020-04.

Tested sealing properties over 600 Pa, BG1 and BGR in accordance with DIN 18542:2020-04

Tested and certified resistance to driving rain by complying with the necessary test parameters.

A product from the Würth Sealing System

The individual product components from the Würth Sealing System are matched to each other with regard to material compatibility.

Excellent ecological compatibility

Tested ecological safety according to GEV test method (class EC 1 PLUS).

Solvent-free and EMICODE EC1^plus

Safe to humans and the environment

Bridging of large joint differences that will withstand driving rain

Due to the tape's large tolerance, component movements can be compensated and common construction tolerances can be bridged more effectively. This reduces the number of tape sizes used.

Water-repellent, yet permeable to water vapour

When compressed accordingly, the tape seals against driving rain; however, due to its permeability to vapour, it provides excellent compensation of moisture.

Proof of Performance

Perimeter sealing systems according to ift certification programme QM360: 2014, reg. no. 188 7050098

EMICODE EC1plus: Very low emission – the EMICODE classification system characterises the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

Notice

The reset times are not subject to a certain specification and are only based on empirical values. They are dependent on the storage time and the storage and processing temperature. The longer the storage times and the lower the processing temperature, the longer the reset times.

Resistance to UV and weathering can only be ensured if installation is performed such that it will withstand driving rain.

Application area

Application

Application area

Function:

The pre-compressed, one-sided self-adhesive VKP Plus sealing tape seals joints reliably and permanently. After the compression is released, the sealing tape develops a resilience that presses firmly against the joint edges and compensates for uneven areas of the joint. Depending on the installation period, the non-adhesive side develops a slight anchoring on the adjacent building material.

In construction:

Expansion joints, seals between prefabricated components, window and door connections, partition walls.

General industry:

Container construction, air-conditioning system construction, machine and apparatus construction etc.

Instructions

Clean the joint/surface of oil, grease and loose material

Remove the cover paper from the sealing tape

Affix the sealing tape to the surface, or lay directly from the roller into the joint and lightly press into place

Cut off approx. 2 cm from the beginning and end of the tape

Lay the tape so that it is blunt; do not lay around corners

Take the additional length of approx. 2 cm/m into account when cutting the tape to length

Sealing function cannot be guaranteed in conditions with standing water

Please observe the specified joint width. Only by doing so can resistance to driving rain and UV be guaranteed.

Technical information


Colour	Black
Chemical basis	Fine open-cell polyurethane foam
Width	10 mm
Min./max. joint width for watertightness in driving rain	3-5 mm
Length of roll	10.0 m
Min. resistance against driving rain (pressure)/conditions	600 Pa / in accordance with DIN 18542-BG1
Building material class/conditions	B1 - Of low flammability / in accordance with DIN 4102
Max. water-vapour diffusion resistance factor value µ	100
Ultraviolet resistance	Yes, when installed to be resistant to driving rain
Min./max. temperature resistance	-30 to 90 °C
Shelf life from production	24 Month
Conditions to maintain shelf life from production	at 5°C to 25°C
Sustainability	Pollutants / Emissions

Time required for expansion in the joint*
0°C	Up to 10 days
10°C	48 hours
20°C	3 hours
30°C	10 minutes
* Caution: The reset times are not subject to a certain specification and are only based on empirical values. They are dependent on the storage time and the storage and processing temperature. The longer the storage times and the lower the processing temperature, the longer the reset times.