Vehicle battery charger WBC-6
Vehicle battery charger WBC 6/12 V – 6 A
CHRG-BTRY-VEH-(WBC-6)-6A-6/12V
Register now and access more than 125,000 products
Flexible use depending on the situation
- Selection of different charging modes: 6 V/12 V
- Selection of different battery types: WET/AGM/EFB (start/stop)/lithium
Intelligent microprocessor charging technology
- Charges up to 3 times faster than conventional devices
- Charges fully discharged batteries from 0.5 V residual voltage
Maximum safety
- Protection against overcharging, reverse polarity, voltage spikes, etc.
- Best temperature monitoring by means of sensor and ventilation system
- Charging stops automatically if risks are detected
Datasheets(X)
Service charging - customer service - (WET, AGM, LITH)
Trickle charging: stock (SUP)
1. Red terminal on + pole, then black terminal on vehicle ground or - pole
2. Connect power cable to 230 V socket
3. First select charging mode, then battery type
4. Push mode button for 3s to interrupt or stop charging
Min./max. input voltage | 240-220 V |
Frequency | 50 Hz |
Charging voltage max. at 12 V | 14.7 V |
Charging current at 12 V | 6 A |
Charging current | 6 A |
Min./max. rechargeable battery/battery capacity | 5-130 Ah |
Power rating | 89 W |
Battery designation | 12 V lead-acid batteries (open and maintenance-free, MF, calcium, VRLA, GEL, AGM fleece,EFB, EFB+) |
Charging characteristics | 8-step |
IP protection class | IP 20 |
Cable length | 150 cm |
Fully insulated charging terminals | Yes |
Length (battery charging cable with terminals) | 208 cm |
Cable cross section | 2.5 mm² |
Length x width x height | 206 x 153 x 69 mm |
Product weight (per item) | 1.300 kg |
Colour | Black grey |
Spark protection | Yes |
Reverse-polarity protection | Yes |
Approval mark | CE |
Last viewed
DIN 7997 plug screw Countersunk Phillips head
Plumber's sealing screw, A2 stainless steel
Oil filter wrench with 3/8" drive for Fiat Punto
HSS annular cutter
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Microfbre cloth, professional
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Top-flex protective glove
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
1/2 inch socket wrench insert metric, hexagon, long