Vehicle sealing tape
Vehicle sealing tape
SEALTPE-VEH-ROLL-15X4-8M
Register now and access more than 125,000 products
- Pre-compressed to 20%
- Self-adhesive on one side
- Temperature resistance: -30°C to +90°C
- Vapour-permeable, thereby preventing water build-up
- Once the compression is released, the sealing tape develops a reset force, which presses firmly against the joint edges and compensates for uneven areas.
Datasheets(X)
As sealing and vibration protection in the ventilation and heating sector for tank systems, bearing areas and for cross-struts in the luggage compartment lid etc. As an installation aid to protect against vibrations for car radios and speakers etc. For wrapping around aerial cables (e.g. VW, Ford)
Clean the joint/surface of oil, grease and loose material. Remove the masking paper from the sealing tape. Stick the sealing tape to the surface, or lay directly from the roller into the joint.
Chemical basis | Acrylate adhesive |
Colour | Black |
Length | 8 m |
Width | 15 mm |
Sealing-tape thickness on delivery | 4 mm |
Max. sealing-tape thickness after expansion | 20 mm |
Min./max. joint width | 4-5 mm |
Min./max. temperature resistance | -30 to 90 °C |
Last viewed
3D hinge ∅ 20 mm
Pan head tapping screw, C shape with AW drive
Speed cutting disc For steel
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile
Plastic blind rivet Type 2
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Tap connection 3/4 inch female thread
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel