W-RD plastic frame anchor Without collar in natural colour. Without approval
Plastic frame anchor, W-RD without collar
ANC-(W-RD)-PLA-WO.COLLAR-10-6X60
ZEBRA
Register now and access more than 125,000 products
- Through-hole mounting
- Low insertion torque of screw – slight expansion of the anchor, virtually no movement of the wall plug body
- Strong twist lock
- Expansion in 4 directions, high load-bearing capacities
- Improved load transfer: Even, continuous load distribution across the entire expansion area
- The hammer-in stop prevents premature expansion of the anchor during installation
- Wall plug body made of high-quality polyamide
- Halogen-free and silicon-free
- Thermally stable from –40 °C to + 80 °C
Performance data determined in Würth test laboratory
- Drill perforated and hollow blocks with a rotary drill (without impact mechanism)
- Drill cuttings must be removed from the drill hole
- Screw length = anchor length + 1x screw Ø
- Use wood or particle board screws WITHOUT an optimised thread bit (e.g. without drill tip, counter thread, ring thread etc.)
Create the drill hole
Clean the drill hole
Set anchor and screw
Screw in the screw
Screw in screw until flush
Create the drill hole
Clean the drill hole
Set anchor and screw
Screw in the screw
Screw in screw until flush
Datasheets(X)
Secondary attachments
Concrete and solid and perforated block masonry.
Suitable for fastening, e.g. wardrobes, curtain rails, wall shelves, light wall cupboards, mirrors, picture frames, cable clamps, electrical switches, washbasins, wooden laths, metal rails, angle brackets, profiles, information signs.
Base materials
Normal weight concrete, masonry walls (solid bricks, solid calcium silicate blocks, vertically perforated bricks, hollow calcium silicate blocks, hollow lightweight concrete blocks, solid blocks and blocks made of lightweight concrete)
Installation temperatures
Temperature of base material: ≥ -20 °C, temperature of anchor sleeve: ≥ 0 °C
Anchor diameter | 6 mm |
Anchor length (l) | 60 mm |
Max. attachment height (t fix) | 10 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Through-hole in the component to be connected (d f) | 6.5 mm |
Screw diameter | 5 mm |
Drill hole depth (h 0) | 60 mm |
Drill hole depth (h 1) | 60 mm |
Type description | W-RD 6, without collar |
Masonry | Axis distance | s ≥ [mm] | 250 | 250 | 250 | 250 |
Nominal drill diameter2) | d0 [mm] | 6 | 8 | 8 | 10 | |
Drill hole depth | h0 ≥ [mm] | 60 | 60 | 80 | 80 | |
Effective anchorage depth3) | hnom ≥ [mm] | 50 | 50 | 70 | 70 | |
Through hole in component being connected | df ≤ [mm] | 6,5 | 8,5 | 8,5 | 10,5 | |
| 1) The recommended loads were obtained with the plug screw with countersunk head in accordance with DIN 97 (art. no. 0157 0. …). 2) If the drilling hole is created in the perforated brick with impact and hammer action, the load capacity is reduced. 3) The anchors must be positioned in such a way that the spreading part is anchored in the web of the stone. | ||||||
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Circular saw blade, wood For cordless hand-held circular saw HKS 10-A/12-A
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
pias® drilling screw, flat head with AW drive
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Screwing crank
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
DIN 7997 plug screw Countersunk Phillips head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Twist drill bit HSCo DIN 338 type RN oxide
Building door mortise lock, PZ class 4