W-RD plastic frame anchor Without collar in natural colour. Without approval

Name: W-RD plastic frame anchor Without collar in natural colour. Without approval
Brand: Würth
SKU: 0912808003

Plastic frame anchor, W-RD without collar
ANC-(W-RD)-PLA-WO.COLLAR-10-8X80
ZEBRA

Art.-no. 0912808003

EAN 4049557392820

All versions

Similar products

Price for selected packaging unit

W-RD plastic frame anchor Without collar in natural colour. Without approval

Art.-no. 0912808003

Price for selected packaging unit

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Flexible application

In-place installation facilitates and speeds up installation

Time savings due to immediate load-bearing capacity

Virtually no spinning of the anchor sleeve due to low installation torque and expansion

Hammer-in stop prevents premature expansion of the anchor during installation

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Effective stability and protection

Strong anti-rotation lock

High working loads due to expansion in four directions

Improved load transmission through even, continuous load transfer across the entire expansion area

Special properties

Anchor sleeve made of high-quality polyamide

Halogen and silicone free

Thermally stable from -40 °C to +80 °C

Inconspicuous natural colour without additional dyes or coatings

Proof of Performance

Performance data determined in Würth test laboratory

Notice

The screw length should correspond to the length of the anchor plus the diameter of the screw

Use wood or chipboard screws without an optimised thread tip (drill tip, counter thread, ring thread etc.)

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Create the drill hole

Clean the drill hole

Set anchor and screw

Screw in the screw

Screw in screw until flush

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Suitable for light and medium loads

Suitable for fastening wardrobes, curtain rails, wall shelves, lightweight wall cupboards, wall-mounted cabinets, mirrors, picture frames, cable clamps, electrical switches, washbasins, wooden beams, wooden laths, metal rails, angle brackets, profiles, information signs etc.

Suitable for attaching components in conjunction with wood or chipboard screws without an optimised thread tip (e.g. drill tip, counter thread, ring thread etc.)

Secondary attachments: Concrete and solid and perforated block masonry

Suitable for anchoring in normal weight concrete, masonry walls (solid brick, solid sand-lime blocks, vertically perforated brick, hollow sand-lime blocks, hollow lightweight concrete blocks, solid lightweight concrete blocks)

Instructions

Drill perforated and hollow concrete blocks with a rotary drill (without hammer mechanism)

Drill cuttings must be removed from the drill hole

Installation temperature in base material ≥ -20 °C

Installation temperature of the anchor sleeve ≥ 0 °C

Anchor diameter	8 mm
Anchor length (l)	80 mm
Max. attachment height (t fix)	10 mm
Nominal drill-bit diameter (d 0)	8 mm
Through-hole in the component to be connected (d f)	8.5 mm
Screw diameter	6 mm
Drill hole depth (h 0)	60 mm
Drill hole depth (h 1)	80 mm
Type description	W-RD 8, without collar

Performance data
Anchor diameter [mm]			6	8	8	10
Effective anchorage depth h_ef [mm]			50	50	70	70
Permissible load¹⁾ (Tensile, shear load and diagonal tensile force at every angle)	Concrete	F_rec [kN] ≥ C20/25¹⁾	0,4	0,4	0,5	0,5
	Solid brick Mz, EN 771-1, DIN 105 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ Mz 36¹⁾	0,2	0,3	0,4	0,3
	Solid sand-lime brick KS, EN 771-2, DIN 106 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ KS 20¹⁾	0,4	0,4	0,5	0,5
	Solid bricks and solid blocks made of normal weight concrete EN 771-3, DIN 18153 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ Vbn12¹⁾	0,4	0,4	0,6	0,6
	Solid bricks and solid blocks made of lightweight concrete EN 771-3, DIN V 18152-100 ≥ NF (≥ 240 x 115 x 71)	F_rec [kN] ≥ V4¹⁾	0,1	0,2	0,3	0,3
	Vertically perforated brick HLz, EN 771-1, DIN 105 ≥ 2DF (≥ 240 x 115 x113)	F_rec[kN] ≥ Hlz 20¹⁾	0,1	0,2	0,2	0,1
	Hollow sand-lime brick KSL, EN 771-2, DIN 106 ≥ 2DF (≥ 240 x 115 x113)	F_rec [kN] ≥ KSL 6¹⁾	0,1	0,2	0,4	0,4
	Hollow concrete block made of lightweight concrete 3K Hbl, EN 771-3, DIN 18151 ≥ 16DF (≥ 497 x 237 x 241)	F_rec [kN] ≥ Hbl 6¹⁾	0,1	0,2	0,1	0,3
¹⁾ The recommended loads were obtained with the plug screw with countersunk head in accordance with DIN 97.

Characteristic values
Concrete	Axis distance	s ≥ [mm]	100	100	100	100
	Edge distance	c ≥ [mm]	70	70	70	140
	Minimum member thickness	h_min ≥ [mm]	100	100	100	100
Masonry	Axis distance	s ≥ [mm]	250	250	250	250
	Edge distance	c ≥ [mm]	100	100	100	100
	Minimum member thickness	h_min ≥ [mm]	115	115	115	115
Nominal drill diameter²⁾		d₀ [mm]	6	8	8	10
Drill hole depth		h₀ ≥ [mm]	60	60	80	80
Effective anchorage depth³⁾		h_nom ≥ [mm]	50	50	70	70
Through hole in component being connected		d_f ≤ [mm]	6,5	8,5	8,5	10,5
¹⁾ The recommended loads were obtained with the plug screw with countersunk head in accordance with DIN 97 (art. no. 0157 0. …). ²⁾ If the drilling hole is created in the perforated brick with impact and hammer action, the load capacity is reduced. ³⁾ The anchors must be positioned in such a way that the spreading part is anchored in the web of the stone.

Additional accessory:

Product

Description

Quantity

Price
/PU

DIN 7997 plug screw Countersunk Phillips head

SCR-PLG-DIN7997-Z3-(A2K)-6X90

Art.-no. 015706 90

DIN 7997, steel, blue zinc-plated, partial thread, countersunk head, PZ cross recess drive

x 100 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).