W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/S steel zinc plated
ANC-(W-VD-IG/S)-(A2K)-M10
Register now and access more than 125,000 products
Anchorage via bond between mortar, female thread sleeve and anchoring base
Galvanised steel female thread sleeve in sizes (female thread) M8, M10, M12 and M16
Drill hole cleaning: 3x blow out
Assembly instructions: Insert female thread sleeve using hammer drill or impact drill in rotation + impact mode.
Datasheets(X)
W-VD-IG/S (galvanised steel) can be used in dry indoor areas
Type description | W-VD-IG/S |
Anchor internal diameter metric | IT M10 |
Female-thread length | 30 mm |
Anchor diameter (d) | 14 mm |
Effective anchoring depth (h ef) | 90 mm |
Anchor length (l) (l) | 90 mm |
Nominal drill-bit diameter cartridge system (d 0) | 16 mm |
Drill hole depth (h 0) | 90 mm |
Surface | Zinc plated |
Material | Steel |
Last viewed
Ecosource fluid for Biomatic fountains
Stone chisel octagon
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Crepe masking tape
Replacement plugs For x-300 banded ear plugs
Flat washer - large external diameter ISO 7093-1 steel 200 HV zinc-plated, blue passivated (A2K)
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
AW® bit
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Metric double open-end wrench DIN 3110/ISO 1085