W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/S steel zinc plated
ANC-(W-VD-IG/S)-(A2K)-M16
Register now and access more than 125,000 products
Anchorage via bond between mortar, female thread sleeve and anchoring base
Galvanised steel female thread sleeve in sizes (female thread) M8, M10, M12 and M16
Drill hole cleaning: 3x blow out
Assembly instructions: Insert female thread sleeve using hammer drill or impact drill in rotation + impact mode.
Datasheets(X)
W-VD-IG/S (galvanised steel) can be used in dry indoor areas
Type description | W-VD-IG/S |
Anchor internal diameter metric | IT M16 |
Female-thread length | 40 mm |
Anchor diameter (d) | 22 mm |
Effective anchoring depth (h ef) | 120 mm |
Anchor length (l) (l) | 120 mm |
Nominal drill-bit diameter cartridge system (d 0) | 25 mm |
Drill hole depth (h 0) | 120 mm |
Surface | Zinc plated |
Material | Steel |
Last viewed
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
1/2" clamping strip With 16 clamps for 1/2 inch sockets
Key pin shackle A4 stainless steel
Shelf trolley Made of steel tube and angular steel
Reversible blade For screwdriver
OrgaAer panel support
Load securing lug For simple, quick and universal application in the area of load securing
Soldering tip for electric soldering iron
Carriage
Office container fitting set OrgaAer