W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Female thread sleeve W-VD-IG/S steel zinc plated
ANC-(W-VD-IG/S)-(A2K)-M8
Register now and access more than 125,000 products
Anchorage via bond between mortar, female thread sleeve and anchoring base
Galvanised steel female thread sleeve in sizes (female thread) M8, M10, M12 and M16
Drill hole cleaning: 3x blow out
Assembly instructions: Insert female thread sleeve using hammer drill or impact drill in rotation + impact mode.
Datasheets(X)
W-VD-IG/S (galvanised steel) can be used in dry indoor areas
Type description | W-VD-IG/S |
Anchor internal diameter metric | IT M8 |
Female-thread length | 25 mm |
Anchor diameter (d) | 12 mm |
Effective anchoring depth (h ef) | 90 mm |
Anchor length (l) (l) | 90 mm |
Nominal drill-bit diameter cartridge system (d 0) | 14 mm |
Drill hole depth (h 0) | 90 mm |
Surface | Zinc plated |
Material | Steel |
Last viewed
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Shoulder screw
Perforated plate
Contact spray Oxidation protection
Hexalobular-type cheese head screw, low head
Aluminium grey end sleeve
Tork 420 cleaning paper
Thread die HSS DIN EN 22568 for standard metric ISO threads
VARIFIX® Systemfix 41 quick fastener For assembly connection of all Varifix mounting rails in the 41 range
Seal WSH AIR III For WSH AIR III fan units