W-VI-IG internally threaded anchor, zinc-plated steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female thread anchor W-VI-IG/S steel zinc plated
ANC-(W-VI-IG/S)-(A2K)-M12X125
Register now and access more than 125,000 products
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/S (zinc-plated steel) can be used in dry indoor areas
Type description | W-VI-IG/S |
Female thread | 12 mm |
Length | 125 mm |
Suitable for perforated sleeve | 0 - not applicable |
Nominal drill-bit diameter (d 0) | 22 mm |
Effective anchoring depth (h ef) | 125 mm |
Drill hole depth (h 0) | 125 mm |
Min./max. screw-in depth | 12-30 mm |
Required injection mortar | WIT-UH 300, WIT-PE 1000 |
Approval | ETA-17/0127, ETA-19/0542 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Protective glove Protect
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Double flat spring contact DFK 2 4.8/6.3
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Corner connector screw with countersunk head, head recess Steel, zinc-plated, blue passivated
PH laser tip screwdriver with hexagon shank
Hexagon nut, flat profile with fine thread DIN 936, steel, zinc-plated, blue passivated (A2K)
Rubber wheel with rotating holder
Anchor rod sold by the meter zinc-plated steel