WÜPLAST® countersunk head screw with Z Phillips head WN 1413, A2 austenitic steel
WÜPLAST W1413 stainless steel A2 countersunk Z
SCR-CS-W1413-Z2-A2-3,5X16
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank overlap
Higher pull-out forces
Thread pitch
- High self-locking capacity
Reduced likelihood of connection working loose
- Material preservation
Higher connection load capacity
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
More secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
WÜPLAST screws only conform to strength class 10.9 as defined in DIN EN ISO 898-1 to a limited extent, since the screw geometry does not allow all requirements to be tested and applied in accordance with the above standard.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 7.3 mm |
Material | Stainless steel A2 |
Property class | 0 - not applicable |
Surface | Plain |
Internal drive | Z2 |
Other standard | W1413 |
Head type | Countersunk head |
Thread type | Plastic screw thread |
Last viewed
Cylindrical pin, hardened DIN 6325, steel, plain
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
PKD-S diamond socket cutter
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Jigsaw blade, construction, three stars For gypsum plasterboard and fibre cement
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Elastic joint sealing tape
ECO cross mounting plate With robust 3-point attachment for Tiomos hinges
HSCo machine tap for through holes in nuts DIN 357