Warning adhesive tape, non-slip, luminous
Hazard warning adhesive tape non-slip luminous
HAZDWARNTPE-SA-NONSLP-YELL/BLACK-25MMX6M
Register now and access more than 125,000 products
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- Yellow-black tape for permanent hazard points and obstacles
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Non-slip warning marking for hazard points indoors and outdoors, such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Acrylate |
Length | 6 m |
Width | 25 mm |
Thickness | 1 mm |
Min./max. temperature conditions | -5 to 50 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Last viewed
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Blind rivet, high-strength flat head
Euro screw, pan head, type B
Long-life grease III
Plastic frame anchor W-UR 14 F SymCon
Façade construction screw Faba® type BZ with hexagon head and sealing washer
Hexagon nut with small width across flats
VDE cable shears Standard: EN 60900. IEC 900.
Standard cable tie with plastic latch
Thin-walled heat-shrink hose Without internal adhesive