Warning marking adhesive tape
Hazard warning adhesive tape self-adhesive
HAZDWARNTPE-SA-YELLOW-BLACK-75MMX33M
Register now and access more than 125,000 products
- Self-adhesive
- Good adhesive properties
- High tear resistance
- Good abrasion resistance
- Easy to use
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- Yellow-black tape for permanent hazard points and obstacles
- Red and white tape for temporarily restricted or movable hazard points and obstacles
- The adhesion surface must be dry and free from grease and dust
Datasheets(X)
The optimal solution for a huge range of applications such as edges of all kinds, work areas, car lifting platforms, steps, bundling.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Natural rubber |
Length | 33 m |
Width | 75 mm |
Thickness | 0.16 mm |
Min./max. temperature conditions | 0 to 60 °C |
Min./max. processing temperature | 5 to 40 °C |
Elongation at break | 150 % |
Last viewed
K insulation pipe clamp With permanently integrated damping insert
Hexagonal bolt with thread up to the head
24 V Easy ABS/EBS repair plug For brake systems
3/8" socket wrench insert Inch, hexagon, short
Electrical insulating tape
O-ring, metric
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Socket contact Micro Quadlok System (MQS) 0.63 Uninsulated
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain