Wheel brush Braided steel with hole
Round brush steel
RDBRSH-AG-KNOTTED-ST-D150X14X22,23MM
Register now and access more than 125,000 products
- No premature opening of the bundles when the brush is positioned at an angle
- Aggressive brushing effect with high wear resistance thanks to anti-clockwise braiding on the wheel brush
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Removes scale, rust, varnish, slag and rubber residues
- Cleans concrete residue from formwork
 | |
Diameter (D) | 150 mm |
Effective width (A) | 14 mm |
Usable length of wire (H) | 30 mm |
Drill hole (d) | 22.23 mm |
Wire diameter | 0.50 mm |
Material of wire | Steel |
Design | Hardened, braided anti-clockwise |
Max. rotation speed | 12500 rpm |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Washer DIN 6340, steel, plain, for clamping device
Cylinder tapping screw, C shape with hexagon socket
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Machinists' hammer with protective handle sheath
Rotatable drop-in anchor For installing plastic windows in the reveal
Plastic coils, 4 mm With power glider
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain