Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-STEEL-D40X9X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 40 x 9 x 6 mm |
Usable length of wire (H) | 9 mm |
Wire diameter | 0.20 mm |
Material of wire | Steel |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 18000 rpm |
Last viewed
Plain washers - large series ISO 7093-1 A4 stainless steel 200 HV plain
Ratchet combination wrench Multi-profile for five screw head drives
Thread-rolling screw
Window construction screw, raised countersunk head FBS
Wheel brush Crimped steel, with shank
Thread die HSS DIN EN 22568 for standard metric ISO threads
Angle plug connector For commercial vehicles
Office container fitting set OrgaAer
3D hinge ∅ 20 mm
Blind rivet, flat head