Window construction screw, self-drilling, countersunk milling head, FEBOS® M
FEBOS M steel zinc plated counters. milling head H
SCR-DBIT-CS-CUTHD-H2-(A2K)-M4X20
FEBOS
Register now and access more than 125,000 products
- Metric thread
- Self-drilling window construction screw for use in UPVC window construction
- For connecting UPVC profiles with the metal reinforcement (up to 2.5 mm) and for securing fittings on profiles with metal stiffening (up to 2.5 mm)
- Greater load capacity threads with thin sheathing iron
The risk of forced advance with large distances between plastic and metal bracing is minimised by the flat, metric thread
If forced advance occurs, the drill tip may break away or the screw break during application.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Nominal diameter (d1) | 4 mm |
Length (l1) | 20 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.2 mm |
Drill tip length (lp) | 5.2 mm |
Internal drive | H2 |
Head type | Countersunk milling head |
Drill tip diameter | 3.4 mm |
Shape of tip | Drilling tip |
Other standard | WN 207 |
Declaration of performance (EU-CPR) | No |
Thread type | Metric thread |
Thread design | Full thread |
Last viewed
1/4 inch ratchet With turntable switching
Feed shaft M20 for hydraulics including clamping nuts and washers Universal, 5 pieces
Pneumatic air multi-port distributor, T-piece For installing a compressed air system
Write-on cable markers
Universal ball joint puller, automobile, 23 mm
Bond + Seal structural adhesive
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
Assembly power cleaner
Angle grinder EWS 7-115 BASIC
Margin trowel