Window frame screw AMO®-Y 11.5 mm
Amo-Y 11.5 steel zinc flake, silver, AW 30
SCR-(AMO-Y)-RW30-(DPS)-11,5X252
AMO III
Register now and access more than 125,000 products
- With special coating and optimised thread geometry
- Positive-locking, removable anchorage with no expansion pressure
- Short installation times, as no setting tools are required
- AW drive for longer bit service life, improved power transmission and no ejection forces
- Removable
- Steel, special coating, silver
General Building approval anchoring of windows in concrete and masonry
Component test using AMO-Y 11.5 mm frame screw to attach a glazed plastic door to a structure without lateral supports or spacers in PP 1.6–0.30 aerated concrete masonry. Test report no. 11-002642-PR01 dated 25 May 2012
Individual window installation situation: Plan, calculate and confirm using the ift assembly tool at www.montagetool.de
It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick). Note the guidelines for planning and executing the installation of windows and house doors (art. no. 5995 000 000). To ensure the fall-proof mounting of windows in line with applicable guidelines and regulations, approved securing systems (e.g. window installation rail W-ABZ) must be used, or approval is required for each individual case.
Datasheets(X)
CAD data (available after login)
Fast and tension-free spaced mounting of window and door frames
- Tension-free spaced installation for all frame materials for anchoring in aerated concrete
- Specially for door and window fixing in aerated concrete
- Installation of window and door frames with ∅ 10 mm pre-drilled mounting hole
 | |
Length (l) | 252 mm |
Thread diameter (d) | 11.5 mm |
Material | Steel |
Surface | Flake zinc silver |
Head type | Socket head |
Head diameter (d(h/k)) | 11.3 mm |
Internal drive | RW30 |
Drill-hole diameter in window frame (dWin) | 10.2 mm |
Thread type | Wood screw thread |
Shape of tip | Tip |
| Raw density class [kg/dm³] | Minimum compressive strength [N/mm²] | Minimum screw-in depth hnom ≥ [mm] | Min. edge spacing cmin ≥ [mm] | Fzul [kN]1) for individual anchors under shear load, free screw length ef = 20mm2) |
Performance data according to general construction permit Further data can be found in the Permit Z-21.1-2097 | ||||
Aerated concrete AAC (≥ 499x240x250) DIN EN 4165; EN 771-4:2011 | ||||
| 0,35 | ≥2 | 140 | 100 | 0,50 |
| 0,35 | ≥4 | 140 | 100 | 0,67 |
| 1) A partial safety value of YF = 1.5 was taken into account for wind 2) Values for deviating free screw lengths/joint widths can be found in permit Z-21.1-2097 | ||||
| General installation parameters | |||
| Nominal drill bit diameter | Aerated concrete | d0 [mm] = | 10,00 |
| Drilling surface diameter | dcut ≤ [mm] | 10,45 | |
| Drill hole depth | h1 ≥ [mm] | 150 | |
| Engagement length | hnom ≥ [mm] | 140 | |
| Nominal drill bit diameter in window frame | dWindow = [mm] | 10,50 | |
| Drilling process | Hammer drilling | ||
| Minimum edge distance | cmin [mm] | 100 |
Last viewed
Paint sealant, Perfect
Yellow nitrile glove
MS 5000 removal key For cylinder core
Plain steel packing tape
Saddle washer for trapezoidal profile
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
HSS DIN 338 SMART STEP twist drill bit
Bolt for furniture connector SE 15
Nozzle For monobolt blind studs
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated