Wire rope clamp DIN 741, zinc-plated steel
DIN 741 steel zinc plated
CBLCLMP-DIN741-(A2K)-D3/16-5,0
Register now and access more than 125,000 products
Due to the withdrawal without replacement of the DIN 741 wire rope clamp, it is recommended that wire rope clamp DIN EN 13411-5 is used. From M5 the cable clamp is available as DIN EN 13411-5. For this, see art. no. 052005/0520065/052008/0520010/0520013/0520016/0520019/0520022/0520026/0520030
Datasheets(X)
CAD data (available after login)
Wire rope clamps for cable end connections with minor requirements. For safety requirements, wire rope clamps in accordance with DIN EN 13411-5 must be used.
The clamping jaw must always be attached to the loaded part of the rope. Where a thimble is used in the loop design, the first wire rope clamp should be attached directly to the thimble. The distance between the wire rope clamps should be at least one wire rope clamp t. Whereby t is the width of the clamping jaw.
 | |
Standards | DIN 741 |
Material | Steel |
Surface | Zinc plated |
Suitable for rope diameter (d) | 5.0 mm |
Grip width (t) | 11 mm |
Thread type x nominal diameter (d1) | M5 |
Height (h1) | 24 mm |
Internal diameter (d3) | 5 mm |
Width (b1) | 23 mm |
RoHS-compliant | Yes |
Last viewed
REDOSLIDE Z45-H interior sliding door fitting For ceiling and wall mounting of wooden doors
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Oil filter wrench, spare belt
Sanding belt for tube belt sander
WÜPOFAST® zinc-plated blue chipboard screw
Stretch X dungarees
Wing screw, square wings Similar to DIN 316, steel 4.8, zinc-plated, blue passivated (A2K), pressed
Shim ring DIN 988, steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain