Wire rope clamp DIN 741, zinc-plated steel
DIN 741 steel zinc plated
CBLCLMP-DIN741-(A2K)-D7/16-11,0
Register now and access more than 125,000 products
Due to the withdrawal without replacement of the DIN 741 wire rope clamp, it is recommended that wire rope clamp DIN EN 13411-5 is used. From M5 the cable clamp is available as DIN EN 13411-5. For this, see art. no. 052005/0520065/052008/0520010/0520013/0520016/0520019/0520022/0520026/0520030
Wire rope clamps for cable end connections with minor requirements. For safety requirements, wire rope clamps in accordance with DIN EN 13411-5 must be used.
The clamping jaw must always be attached to the loaded part of the rope. Where a thimble is used in the loop design, the first wire rope clamp should be attached directly to the thimble. The distance between the wire rope clamps should be at least one wire rope clamp t. Whereby t is the width of the clamping jaw.
 | |
Standards | DIN 741 |
Material | Steel |
Surface | Zinc plated |
Suitable for rope diameter (d) | 11 mm |
Grip width (t) | 19 mm |
Thread type x nominal diameter (d1) | M8 |
Height (h1) | 44 mm |
Width (b1) | 36 mm |
RoHS-compliant | Yes |
Datasheets(X)
CAD data (available after login)
Last viewed
Fabric sanding belt Zirconia alumina electric grinding file
Hammer drill bit Max Quadro-L Vario
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Grooved nut with fine thread DIN 1804, steel, zinc-plated, blue passivated (A2K)
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Wood screw, DIN 95 brass Raised countersunk head, slotted
VDE 3/8 inch socket wrench, metric, hexagon, short
Connection Seal For pressure regulators
Ring nut DIN 582, steel C15E, zinc-plated, blue passivated (A2K)
Façade construction screw Faba® type A with hexagon head and sealing washer
