clamping screws Open construction, with welded ends
DIN 1480 Steel blank with weld-on ends
TURNBCKL-WELDONEND-DIN1480-M30
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M30 |
Turnbuckle-sleeve length (l) | 255 mm |
Turnbuckle-sleeve width (external) | 74 mm |
Outer diameter of sleeve end | 45 mm |
Turnbuckle-sleeve diameter | 34 mm |
Length (of welding end) | 260 mm |
Thread length (metric thread) | 160 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Screwdriver set 5 pieces
Slotted cheese head DIN 84, A4 stainless steel, plain
CERALINE hook-and-loop fabric disc
Hexagon head serrated screw with flange W-0274, steel 8.8, zinc-plated, blue passivated (A2K)
clamping screws Open construction, with welded ends
K insulation pipe clamp With permanently integrated damping insert
Saw blade For Japanese hand saw
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
Dry wall screw with coarse thread, belt-linked
Metric combination wrench with POWERDRIV®