pias wing-tip self-drilling screw, countersunk milling head with AW recess - SCR-DBIT-WNG-CS-CUTHD-AW40-(RUS)-8X50

pias wing-tip self-drilling screw, countersunk milling head with AW recess - SCR-DBIT-WNG-CS-CUTHD-AW40-(RUS)-8X50 - 1

pias wing-tip self-drilling screw, countersunk milling head with AW recess

Name: pias wing-tip self-drilling screw, countersunk milling head with AW recess
Brand: Würth
SKU: 021900850

SCR-DBIT-WNG-CS-CUTHD-AW40-(RUS)-8X50

Art.-no. 021900850

EAN 4038898074052

All versions

Similar products

Price for selected packaging unit

pias wing-tip self-drilling screw, countersunk milling head with AW recess

Art.-no. 021900850

Price for selected packaging unit

Quantity

x 250 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

The self-drilling screw with up to 50% time savings when fastening wood to metal sub-structures

Steel, Ruspert-coated (grey)

Cr(6)-free corrosion protection, approx. 500 h with no base metal corrosion (salt spray test as per DIN EN ISO 9227-NSS)

AW recess system for better torque transmission, a longer service life and optimal centring

Notice

Wing-tip pias screws must be appropriately tested for usability for each application.

Only install using application tools with a depth stop and claw coupling.

The maximum fixture length is calculated as follows: Wood thickness + substructure thickness lU = max. fixture length

Self-drilling screws must be installed with a suitable drill/driver (e.g. cordless drill/driver with depth stop)

The use of impact drivers is not permitted

Self-drilling screws must be screwed in perpendicular to the surface of the component

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For use with hard and soft woods

Instructions

Force feeding of the screw is prevented by the wings drilling out the wood

The core hole is drilled into the substructure. The wings break off upon contact with the metal

The first few turns of the screw cut the thread, the remainder of the screw then screws into the thread


Nominal diameter (d)	8 mm
Length (l)	50 mm
Head diameter (d_k)	15 mm
Head height (k₁)	5.4 mm
Drill tip length (l_p)	18 mm
Other standard	Company standard
Material	Steel
Surface	Flake zinc grey
Head type	Countersunk milling head
Internal drive	AW40
Thread type	Metric thread
Min. recommended substructure thickness	3 mm
Max. material thickness to be drilled through (metal) (l_U)	12 mm
Max. attachment thickness (l_B)	18 mm
Min./max. recommended installation speed (idling)	600-1200 rpm
RoHS-compliant	Yes

Additional accessory:

Product

Description

Quantity

Price
/PU

AW<SUP>®</SUP> E 6.3 bit (1/4 inch) with patented AW tip and colour coding

AW® E 6.3 bit (1/4 inch) with patented AW tip and colour coding

BIT-AW40-LUMINOUSPINK-1/4IN-L50MM

Art.-no. 06145240

x 5 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).