Acoustic insulation anchor W-SSD, type OB for fixtures with acoustic insulation requirements, without collar
Noise protection anchor, W-SSD, type OB
DWL-(W-SSD/OB)-14X50
Register now and access more than 125,000 products
- Reduced sound level by means of solid-borne sound insulation
- Reduces the transfer and the conduction of solid-borne sound into the structure
- Outstanding screw guidance, no lateral breaking out
- High holding power and static friction
- Immediate load-bearing capacity after insertion - no waiting
- Weather-resistant
- UV resistance
- Salt water-resistant
- Thermally stable from -40°C to +100°C
- Halogen-free
- Chemical-resistant
- Free of silicone-containing substances
Drill the hole
Clean the drill hole
Screw in screw and set component
Screw on and tighten nut
Datasheets(X)
- For structure-borne sound insulation
- Can be used for light-duty and medium-duty applications requiring sound protection, e.g. in concrete, solid sand-lime brick, solid brick, gypsum wallboard, hollow concrete blocks, hollow sand-lime brick and vertically perforated brick
- For anchorages in heating, ventilation and plumbing applications (e.g. pipe clamps, toilets, cisterns etc.)
- Suitable for screws with a wood thread
- For use in pre-positioned installation
Type description | W-SSD |
Anchor diameter | 14 mm |
Design | Without collar |
Anchor length (l) | 50 mm |
Required wood screw diameter (d scr.wood) | 6 - 8 mm |
Nominal drill-bit diameter (d 0) | 14 mm |
Halogen-free | Yes |
Ultraviolet resistance | Yes |
Silicone-free | Yes |
Min. temperature resistance | -40 °C |
Resistance against | Weather, Salt water, Chemicals |
Drill hole depth (t) | 60 mm |
Max. temperature resistance | 100 °C |
Required stud screw diameter (d scr) | 8 mm |
Last viewed
Drift punch According to DIN 6458
Collated nails and gas cartridge NG CS-2/3 HFB
Wood screw, DIN 95 brass Raised countersunk head, slotted
1" slider bar With pin detent
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Tension bolt for manual/hydraulic punch
Allen key, hexagon socket with ball head Extra-long design
CORDURA® tradesman's trousers
Serrated lock washer, countersunk, shape V
Heat-shrink connection set 0.6/1 kV