Adjustment tool for crank cap
Adjustment tool for crank cap 2in1
ADJTL-F.CRNKCAP-W.WNG-2IN1
Register now and access more than 125,000 products
Tool for installing and removing the crank adjustment caps
2-in-1 compatibility:
- Shimano Hollowtech II cranks
- SRAM and RaceFace cranks with a 16 mm hexagon socket
Two wings enable simple, tool-free use
It also has an 8 mm hexagon socket for loosening stuck or overtightened caps
Datasheets(X)
Material | Steel |
Surface | Nickel plated |
Product weight (per item) | 59.000 g |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, yellow chromated (A2C)
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
Flat washer For hexagon head bolts and nuts, DIN 125, plain brass
Spray shine
Self-adhesive cable fastening cord clips
Hexagon bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Telescopic handle for rolling tool cases
Screw cap for number plate screw