Belt clamp Vario
Vario belt clamp
BLCLMP-VARIO/EDGES-L7M
Register now and access more than 125,000 products
- Follow the arrows to pull out or wind the tape
- Automatic locking when stretching
- Automatic opening when turning the spindle in reverse
- Integrated winding mechanism
- Tape recoil on both sides for regular clamping without deformation
- Special polyester fabric tape
- Highly resistant to breakage (5000 N)
- Low extension
- Clamping area up to 7 m
- The crank can be mounted on both sides
- System box and clamping corners made of fibreglass-reinforced polyamide
- Vario corners with oscillating pressure plates
- The tape can clamp the bevels in any position
The clamping tools are not suitable for lifting, pulling or transporting, or for use with living beings. Incorrect usage may cause injury or material damage. The tape can only be tightened by hand without any tools.
Datasheets(X)
Last viewed
Clamping ring, type 2 Concave (curves inwards) with a marked frame channel
PLUS trapezoidal sheet metal rail with EPDM seal
Beaver tail roof hook A2 stainless steel
Fixanchor W-FAZ/S
Splash guard for oil collection tray
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Alignment tool For balance shaft FCA 0.9 Twinair
Machinist's hammer German design in accordance with DIN 1041
Hand cleaner N-Active
HSCo spot weld drill bit