Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(5,0-6,5)-4,0X10
Register now and access more than 125,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 8.4 mm |
Head height (k1) | 1.7 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 5.0-6.5 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 850 N |
Tensile fracture load | 1200 N |
Nominal diameter x length (Ø d x l) | 4 x 10 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Clipboard
FLEXEN® cold rubber Plus S3 continuous insulation boards
Threaded fuse MEGA
Stud
Spring for DC aluminium wheel For safety spoke weights made from zinc
Cross cut chisel In line with DIN 6451
Customer service sticker