Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
ISO 15984 countersunk head stainless steel A2/A2
RIV-ISO15984-A2/A2-(3,0-5,0)-3,0X8,0
Register now and access more than 125,000 products
Sleeve: A2 stainless steel; mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15984 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 8 mm |
Head diameter (dk) | 6.3 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 3.0-5.0 mm |
Drill hole diameter | 3.1 mm |
Shear-fracture load | 1800 N |
Tensile fracture load | 2200 N |
Nominal diameter x length (Ø d x l) | 3 x 8 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Slotted countersunk head screw DIN 963, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Countersunk tapping screw, shape C with hexalobular drive
Cylindrical pin ISO 2338 A1 stainless steel (h8)
Twist drill bit HSCo DIN 338 type RN oxide
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Expanding nut, type 3 Head round, tip pointed
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A2-070 stainless steel, plain
Blind rivet, flat head