Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
ISO 15979 flat head steel/steel
RIV-ISO15979-ST/ST-A2K-(9,0-11,0)-6,4X18
Register now and access more than 125,000 products
Sleeve: Zinc-plated steel; mandrel: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15979 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 6.4 x 18 mm |
Min./max. grip range | 9.0-11.0 mm |
Head diameter (dk) | 13.0 mm |
Head height (k1) | 2.2 mm |
Min./max. drill hole diameter | 6.5-6.6 mm |
Shear-fracture load | 4900 N |
Tensile fracture load | 5700 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 6.5 mm |
Standards | ISO 15979 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 3.85 mm |
Last viewed
Washer with round hole Mainly for wood construction, DIN 440, A2 stainless steel
Blind rivet, large flat head
Countersunk head screw with hexagon socket
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Underbody seal - can be painted over
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Top head dry wall screw, collated
TX bit E 6.3 (1/4 inch) with hole
Washer Inch, zinc-plated steel (A2K)
Countersunk screw with hexalobular head