Bodywork pull clamp Box
Bodywork pull clamp, box type
PULCLMP-BDYWRK-TYP-BOX-2PULDIRECT
Register now and access more than 125,000 products
- Large overhang of the jaws, allowing e.g. angled sheet metal too to be securely encompassed.
- The two pulling eyes allow straightening jobs in two pull directions at the same time.
- The jaws are fixed to the component with non-slip properties using the clamping screw. The retention force of the jaws is automatically increased through the linear pulling action (clamping cone).
- The pulling eyes can be connected with a slide hammer or a chain using hooks.
Datasheets(X)
Product weight (per item) | 2269 g |
Last viewed
Tap DN 45 thread for 5 l and 10 l plastic canisters
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Connection sleeve with bolt For system connector SV 20 E
3/8" socket wrench bi-hex, multi profile
WÜPOFAST® zinc-plated blue chipboard screw
Heat-shrink repair sleeve
Adjusting ring DIN 705, shape A and DIN 553 set screw, zinc-plated steel, blue passivated
Workshop scheduler, five rows DIN A4
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain