CERALINE LONGLIFE & SPEED cutting disc for steel and stainless steel
CUTDISC-CG-LS-ST/A2-SR-TH1,0-BR22,23-125
Art.-no. 0664831250
EAN 4061975401113
Register now and access more than 125,000 products
- High-performance ceramic abrasive grain with optimum binding system
- Only very little contact pressure is required, increasing working comfort
- Exceptionally long service life due to extremely low heat generation
- Low burr formation ensures significantly less rework
- Highly tear-resistant special fabric, together with the product structure, create a very large safety buffer that exceeds all safety requirements of the relevant standards
- Fast, easy operation for significantly less stress during use
- Optimum cutting properties, particularly in very hard and demanding workpieces as well as solid materials
- ZEBRA quality for particularly high demands
- Store in a dry place, at 20 °C room temperature
- Always wear appropriate protective clothing while working
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, please refer to the package insert
Datasheets(X)
- Particularly suitable for steel and stainless steel
- Equally able to cut thick and thin materials such as pipes, solid materials, flat materials etc.
Versatility (points system) | 3 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 4 of 4 points |
Cut quality (point system) | 4 of 4 points |
Diameter x thickness | 125 x 1.0 mm |
Bore hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 12250 rpm |
Max. circumferential speed | 80 m/s |
Material to be processed | Steel, Stainless steel |
Last viewed
SHARK UR plastic frame fixing with zinc plated steel countersunk head screw
Hexagon Socket Head Cap Screw ISO 4762, zinc plated 8.8 steel with thick-layer passivation VZD
Plastic spacer
Hexagonal bolt with flange EN 1665, 8.8 steel with silver zinc-flake coating (ZFSHL)
Hexagon Socket Head Cap Screw with low Head DIN 7984, A2-070 stainless steel, plain
Metric double open-end wrench DIN 3110/ISO 1085
Flat washer with chamfer ISO 7090 A4 stainless steel, 200 HV, plain
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Safety screw with hexalobular head and pin similar to ISO 10642 because of TX drive, A2 stainless steel, plain