Cage nut WN 0381 zinc-plated steel, blue passivated (A2K) without circlip
WN 0381 steel zinc-plated
NUT-CAGE-WO.LOK-(A2K)-(1-1,7)-M8
Register now and access more than 125,000 products
- Used as internal connectors for sheet metal structures
- Efficient installation by simply pressing in
- Self-adhesive due to spring-steel nut holder
- Variations in manufacturing tolerances are compensated for during installation by the longitudinal and lateral mobility of the nut in the nut holder
- Can also be used in difficult installation conditions or tight spaces
- Can be reused
Datasheets(X)
CAD data (available after login)
 | |
Standards | WN 381 |
Material | Steel |
Surface | Zinc plated |
Thread type x nominal diameter (D) | M8 |
Max. width (b1) | 16.9 mm |
Max. length (a1) | 18.4 mm |
Height (h1) | 10.5 mm |
Min./max. material thickness | 1.0-1.7 mm |
Punched-hole width x punched-hole length (n) | 12.5 x 12.5 mm |
RoHS-compliant | Yes |
Last viewed
Flat cover cap, for hexalobular socket and AW drive
Wooden shaft, conical With ground cone and rounded shaft end
Lock washer NF E 25511
1/2 inch socket wrench insert metric, hexagon, short
Rechargeable battery Li-ion 18 V BASIC M-CUBE
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers
ASSY® 4 chipboard screws assortment
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Stripping knife AM 280
Passenger car rubber valve, Snap-In Eco