Carbon monoxide detector Ei208iDWC
CO detector Ei208iDW
DETR-CO-EI208IDW-PLA-WHITE-12X4X12CM
Register now and access more than 125,000 products
Uses an electrochemical sensor to measure the concentration of CO in the air
Each detector is tested in real carbon monoxide before leaving the factory
The i-series has the additional AudioLINK function
Enables the reading of detector information on-site via smartphone, such as operating time, battery status and much more.
Datasheets(X)
In any location with heat-producing appliances that use carbon-containing fuels, incomplete combustion may result in carbon monoxide being produced.
In domestic settings, this can include:
- Gas, oil, briquette or pellet heating
- Fireplace or coal stoves
- Open fireplaces
- Gas stoves, gas boilers
Rechargeable battery/battery permanently installed | Yes |
Number of rechargeable batteries/batteries | 1 PCS |
Type of rechargeable battery/battery | Li-lon |
Rechargeable battery/battery life | 10 years |
Diameter | 12 cm |
Height | 4 cm |
Nominal voltage | 3 V |
IP protection class | IP 42 |
Max. relative humidity in area of application | 95 % |
Colour of housing | White |
Sound-pressure level | 85 dB |
Last viewed
VARIFIX® beam clamp, standard With threaded hole
REFILLOmat filling system
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Knurled thumb screw, low profile
Y-connector For attaching onto alternating sides
Hexagon nut with fine thread DIN 934, steel I8I, zinc-plated, blue passivated (A2K)
Façade construction screw Faba® type A with hexagon head and sealing washer