Clamping mandrel For cutting discs and grinding discs
Clamping mandrel for cutting and grinding disc
MNDRL-CUTDISC-D10-(0-8MM)-SHFT6MM
ZEBRA
Register now and access more than 125,000 products
Clamping range from 0–8 mm
Just one clamping mandrel for all clamping ranges.
Clamping screw is completely countersunk in clamping mandrel
No protruding thread sections, enabling work even in cramped spaces.
Clamping screw with large contact surface and right-hand thread (self-clamping effect)
Reliable holding of wheels.
Clamping screw with large support surface and lengthwise slit
Easy to loosen or tighten with a 17 mm open-ended spanner or slotted screwdriver.
Datasheets(X)
Suitable for bore diameter | 10 mm |
Length | 58 mm |
Shank diameter | 6 mm |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Release tool For connectors with two symmetrically arranged locking lugs
Spare blade For concrete scrapers
Hexagon nut, low profile with fine thread DIN 439, A2 stainless steel, plain
Slotted cheese head DIN 84, brass, plain
Flat scraper With wooden handle
1/2" socket wrench insert For TX screws, short
Concrete screw with countersunk head W-BS/S