Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-20X20
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
 | |
Nominal diameter (d1) | 20 mm |
Length (l1) | 20 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Clip, metric
Flat-head screw with H cross recess ISO 7045, A4-70 stainless steel, plain
Hexagon nut with left-hand thread DIN 934, steel I8I, plain
Twist drill bit HSS DIN 338 type RW
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Hexagon socket bit
Pre-stretched Packfix packaging film For optimal securing of load units with low consumption
Hexagonal bolt with shank and fine thread DIN 960, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)
