Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-20X70
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 20 mm |
Length (l1) | 70 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Cylindrical pin, hardened DIN 6325, steel, plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Compartment separator For drawer cabinets
1/2-inch impact socket wrench insert hexagon, metric, long
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
90° angled tube cable lug Standard (similar to DIN)
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Cable clamp type H