Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-30X100
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 30 mm |
Length (l1) | 100 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Universal protector GPN 350 Polyethylene (PE-LD), natural
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Universal protector GPN 610 Polyethylene (PE-LD), yellow
Wedge lock washer W.TEC series Narrow shape
Tape measure Three stops with magnet
Fuse holder For flat blade fuses
Twist drill bit HSS DIN 1897 type RN
Stand-off installation system Amo®-Max spacer
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Butyl sealing tape